Bollards Services contact us: +919810599480

A Bollard service is used to create a protective or architectural. When bollards are installed in traffic and mark boundaries and Garden light. They are in available a wide variety of shapes and styles to accentuate or visually stand out in their settings. Mostly Bollards can also be used in constructed to physically block vehicle, protecting people and round the property. Today these security bollards are used in decorative elements or chosen to complement the landscape, but their primary consideration is resistance. The Bollards are made from almost any material, depending on their needed requirement, Today the most common bollards are made in metal, stone, cement, or plastic.

Building and landscape architecture

The visual quality of highly shows in buildings and landscapes. Choose the styles of range, including premium ornamental designs—made from iron or aluminum—to any historical or contemporary aesthetic. Bollards increase the landscape designs while increasing safety and walkability for any time of night. Mostly Bollards are used to after complementing new or old both building architecture. The bollards highly visual cues and enhance a sense of place for approaching visitors.

Traffic guidance

Industrial Products Company important visual cues for drivers. Mostly bollards are used to danger/sensitive environments for safe and responsible driving. Bollards used to an optimal height for driver visibility when maintaining clear sight lines and pedestrian flow when required. Mostly bollards used to traffic management devices. It is more sufficient including signage, road barriers, curbs, speed bumps and crosswalks. Bollards can use visual indicators around sensitive areas. It is used in building areas, utility boxes, parking attendant booths or pedestrian walkways and mostly around the hospital. When used in crowd urban areas, bollards divided bike lanes and pedestrian walkways to ensure safety for all transportation. Mostly in parking areas and restricted access roads, bollards can be installed to allow temporary or seasonal access.

Protection

Bollards used to clear, visible barriers to off-limit or sensitive areas and VIP buildings. Mostly Steel bollards securities posts are made from structural grade steel. Today bollards can be made in concrete to withstand highly vehicle collisions. The security bollards on their own as stand-alone posts. Today it’s used in decorative bollards and available in different-2 size and shape. Stand-alone security posts can be covered with cost-effective plastic sleeves to maximize visibility. Steel-pipe bollards are ideal in pedestrian areas—such as building entrances, transit hubs or parking-lot walkways because it is very strong without any maintenance. They are ideally used in vulnerable populations—senior citizens, young children or people with disabilities. Security posts also protect vulnerable building areas.

Specialized applications

Flexible bollards are designed to stand vehicles areas—bending up to 90 degrees without compromising their original shape or any position. The bollards are reduced to the minimal accident to vehicles, making them for ideal locations where collisions areas. Flexible bollards are easy to install with fixed or removable types.

Light bollards are mostly used for lighting open areas and pathways. The LED lighting heads powered entirely by solar cells. The energy management systems take into account available sunlight and maximize output at desired times.  Any range of color, distribution and scheduling patterns used in bollards.

Today Bike parking bollards used in the decorative standard and ornamental bollard designs. When also providing a means for easy bicycle storage. They can be equipped with removable mountings for seasonal accommodation.

 Quality materials

Bollards are available in a different range of iron, steel, aluminum and plastic materials. The standard steel and aluminum products are powder coated to lasting durability and improved visual quality. The stainless steel bollards offer resists rust and no paints require in corrosive environments.

Easy installation

A range of Bollards installation methods based on the product and site. The styles include embedding into new concrete and bolt-down flanges for new or existing concrete.

Competitive and convenient purchasing

Detailed price lists, including volume discounts, are available online. Visit our product category pages or individual item pages for price details. The formal quotes at each item for details and shipping costs to your location.

Type of bollards:

Maritime bollards

Traffic bollards

Illuminated bollards

Bell bollards

Removable bollards

Flexible bollards

Racing bollards

Bollard covers

Protective bollards

Bollard lights

Other Industrial Products Company:

·         Playgrounds

·         Trails/Trailheads

·         Roadways

·         Leisure Parks

·         Fire Access Lanes

·         Building Setbacks

·         Sports Field

·         Malls

·         Traffic Gates

·         Landscapes

·         Pathways

·         Site Utilities

·         Bus Debarkation

·         Toll Booth

·         Bicycle Lane

·         Traffic Medians

·         Site Perimeters

·         Intersections

·         Store Fronts

·         Building Hardening

·         Vehicle Parking

·         Site Access Control

·         Site Surveillance

·         Vehicle Pick-Up

Rebaring Technique in Reinforced Concrete System contact us: +919810599480

Industrial Products Company supplied all Rebaring system tools and services, we have authorized dealer. (Yogendra K. Singh Contact us: 9810599480)

Mostly All know that the concrete is well strong in compression. The rebars sytem is higly good, that  the best use to make slab.

The rainforced bar system is design by the engineers. The engineers  provides  detail of the number of reinforcement.

The Different  type of load on concrete building as horizontal, compression, lateral and torsion.

The structure is dependent  on the method by the Engineers and employed to install the reinforcement bar system. The reinforcement bars are mainly conect to proper bonding with the concrete.

Operations in Rebaring for Reinforced Concrete Works

The main operations carried out in rebaring for reinforced concrete construction bars are cutting, bending and tying. The reinforcement bars used reinforced concrete work mainly different-2 ranges but its mainly from 6 to 42mm. These type of reinforcement bars come from the steel mill in particular lengths.

So, during installation, the reinforcement bars must be used only required size. The design shows by the engineer the details about the bars bending and related works, based on which proceed the work. The rigid connection Provides to all the members of the rebars.

Necessity of Rebaring Technique in Reinforced Concrete Construction

The steel reinforcement mostly is divided into two categories i.e.

·         Primary Reinforcement or Main Steel reinforcement

·         Secondary reinforcement or distribution reinforcement

The reinforcement bars system works on limited cracking. The cracking is depend upon the temperature variations. The employee is specified diameter are bent at the ends. The Main Bar are used in beams, columns , slab etc.

Mostly stirrups are circular, square, rectangular, helical or diamond shape based on the cross-section of the element. The bar in the corners may be L  shaped.

Equipments used for Rebaring Techniques

The equipment are used for rebaring system with time to time, like the size of bar. The Larger bars is very difficult to handle by hand opreation.

Mostly employee used hammer and chisel for bar bending.The bar is held fixed with the help of three thick bars over a bar bender bench.then the binding is proper used in manual force and levers. to tie the roads and cutting holes are used, tie by the steel wire.Drill hole are use to fix the iron rod with the chemicel and make different-2  joints by engineer design.

How Is Rebarring Done

•Drill Hole in Concrete based on design

•Fill it with chemical

•Insert rebar and allow for chemical curing

A)   Simply Supported Connections

•Adding beam between columns

•Casting slab in a cutout

B)  Spliced Connections

•Extension of column

•Extension of beam/ slab

•Casting slab in a cutout

C)  Moment Connections

•Column from Raft/ Pile cap

•Cantilever beam from column

•Bracket on column

D)  Shear Connectors

•Thickening of slabs/ raft

•J bolting while jacketing

Rebar Grouting Outcome

• No damage to existing concrete (Cost saving on prepare & repair)

• Precise controlled application (Quality of work & Speed)

• Flexibility in designs

Role of Designer

 To Provide Safe Design

• Right Embedment depth

• Right Steel details

• Right chemical

Beyond Design

Chemical Selection may depend on parameters like:

•Temperature range (long/ short)

•Drilling method

•Effect of chemicals

•Creep Behaviour etc…

 Special Care in Application with Deep Embedment

•Proper Cleaning

•Usage of Piston Plug

Core Cutting Services contact us: +919810599480

Abstract

The wear evolution and its influence on drilling parameters were also measured. These measurements provided important input parameters into a semi-empirical physical drilling model based on indentation theory. The basis model along with a comparison between drilling performance and actual drilling test results are presented on paper. All drilling models for diamond impregnated segments on which this PCD model.

The experimental development of the optimum core to match the available drive parameters, therefore complemented by modelling.The first phase towards a full system development of tool, accessories and core bits for drilling in reinforced concrete.

1.      Introduction

PCD has been successfully used for both rock drilling and metal cutting, up to now it has not been commercially applied for the simultaneous cutting of both mineralic and metallic materials in the case reinforced concrete. In the dismantling of decommissioned nuclear facilities and drilling in water-sensitive environments such as hospitals, computer server rooms, etc. The first application in particular is extremely challenging. The cutters are more efficient and more universal for diamond impregnated segments and therefore provide measurable customer benefits. The widespread penetration of this technology into mainstream building and construction markets is dependent on reducing specific core drilling costs per unit depth, which can only be achieved when the excellent drilling performance is matched by guaranteed reliability and long lifetime.

Ever since the first products were available to specialized decommissioning and dismantling

Sub-contractors in 2004, only standard tools have been available and core bit designs have been adjusted to optimize performance under the available drilling parameters. In the future developments will concentrate in the drilling system, with the Diamond cutter, tool, rig, bit, hole starting points and air flushing system under investigation. The drilling model addresses the issue of cutter, bit and drive parameters and can be used in a predictive manner as well as having a descriptive character. Bit speed and lifetime in concrete can be fairly reliably predicted within the boundary limits of the model, although it has not been extended to the case of the rebar.

Drilling model

The model is based on wedge indentation theory, and is a modified  “Reversed hardness model”, PCD indentation depth and calculating penetration per Revolution in a concrete of known “hardness” and “drill ability”. This is transferred into Heat = 1600 J/mm3Di drilling speed values. Three different end-of-life criteria are considered, based on wear and fracture. The influence of wear on drilling speed is taken into consideration by the models’ continuous adjustment of the primary input parameters in 1mm drilling depth increments. This differs from the related model for diamond impregnated segments , where ideal and steady-state conditions are assumed. A number of input parameters are necessary to achieve useful output from such a model. Many parameters can be measured directly, while others must be determined in the validation and calibration stages of modeling, by comparing model outputs with actual values and adapting the input values to achieve closer correlation if necessary. The disadvantage of this type of modeling  energetic modeling is that the geometrical and physical properties of the tribosystem must be well characterized for modeling to have any degree of accuracy, whereas the energetic approach integrally describes material demolition in the macro- and micro-domains without needing such specific inputs.

Core drilling in reinforced concrete using polycrystalline diamond (PCD) cutters

The production and application of core drill bits, rigs and motors give the edge in the market. Our products can be viewed as innovative solutions for large-scale projects while remaining cost-effective for everyday construction site use.

Hydro Pyro Quell System contact us: +919810599480

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.(Yogendra K. Singh Contact us: +919810599480)

It is a well-established fact that water is fire's oldest enemy. It cools at a rate of 2.6 MW per liter every second. But using water to try and douse a fire can spell disaster. Until now, the only way to put out an oil fire was with a chemical foam extinguisher, which destroyed every ingredient in your kitchen while also being greatly harmful to the environment.

Worse still, you had to shut down the kitchen for hours or even days, for a full cleanup. And if you were running an industrial kitchen, a food processing unit, a restaurant or hotel or café, this could result in substantial loss in revenue. Not to mention loss of reputation.

UNDERSTANDING OIL FIRES

Contrary to popular belief, oil itself doesn't catch fire if overheated. When it reaches its burning temperature which is around 300°C, it begins to emit combustible fumes. Because the ignition temperature of these combustible fumes is far lower than that of the oil, they spontaneously ignite, fuelled by the oxygen in the ambient air. Oil fires spread rapidly and cannot be put out with ordinary water extinguishers, giving rise to the need of property-damaging chemical agent extinguishers.

The Ceasefire Hydro Pyro quell System (CHPS) is a global revolution in fighting fat fires. Ceasefire now manufactures and brings this cutting edge equipment to market, in keeping with our tradition of putting the world's latest firefighting technology at your disposal. 

The Hydro Pyro quell System is available in 2 liter, 3 liter and 6 liter variants. All designed to kill fires with no collateral damage. All perfect firefighters at every stage of the food supply chain - production, storage, transportation or distribution. All using patented technology first introduced in India by Ceasefire, the country’s largest, most trusted fire safety solutions provider. 

THE TECHNOLOGY The revolutionary new  Hydro Pyro quell System is designed to combat Class F fires, and is also a comprehensive solution to Class A, B, C and electrically started fires. Combining the use of distilled water with award-winning technology, it leaves property unharmed and, unlike chemical foams, makes it environment friendly. 

It consists of a specially designed rotary within the Mist Generator which, upon activation, mixes water and air in a pre-set proportion to generate the mist. The mist is then propelled through a specially designed nozzle, giving it a throw of over 10 feet.

Product Features:
Introduction

Solid stainless steel body

Easy snap safety seal

Classification 

Sate of the art pressure gauge 

Reduces damage

Environment friendly

ABC Powder Based Cartridge Fire Extinguishers contact us: +919810599480

Industrial Products Company Supplied all Ceasefire products, we have authorized dealer.(yogendra K. Singh Contact us: +919810599480)

ABC Powder Cartridge takes the guesswork and confusion out of firefighting. Being one of the most versatile extinguishing agents known to man, ABC Powder fights Class A, B, C and electrical fires with ease.

​When ABC Powder falls on a Fire, the Mono Ammonium Phosphate in it expands and forms a thin layer on top of the surface. This controls the Fire and stops re-ignition.

APPLICATION AREAS

*Fire-prone industries

*Shops and Showrooms

*Factories

*Schools

*Offices and industries in remote areas

*Petrol Pumps

Fire Automatic Launcher contact us: +919810599480

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.(yogendra K. singh contact us: +919810599480)

World's only fire extinguisher that triples up as a manual extinguisher, an automatic extinguisher & a modular suppression system.


Ceasefire Launcher - The world’s first fire extinguisher that’s one, an extinguisher; two, takes over firefighting when the fire becomes too big to handle; and three, turns into a suppression system when no one is around. It's a futuristic product powered by MAP 90 that takes firefighting to a level the world has yet to experience. In the event of a large fire, it allows the firefighter to launch the fire extinguisher in the direction of the flames and rush to safety, while the extinguisher automatically activates and extinguishes the flames.
​
When no one is around to detect the fire, this one-of-a-kind extinguisher launches into a standalone, modular suppression system when it senses a rise in temperature over 60°C. Ensuring that no fire ever goes undetected and unaddressed. The biggest pro of this revolutionary extinguisher is that it eliminates the need for the firefighter to go near the fire. 

Product Features

1)Works on all classes of fire
2)Deep Drawn Body
3)Convenient handle
4)Unique Discharge Mechanism
5)Self-Actuation
6)Two Heat Sensors
7)Easy Snap Safety Seal
8)State-of-the-art Pressure Gauge
9)Hydrostatic Pressure Testing and Helium Leak Detection Test
10)EPDM Rubber Hosepipe
11)Conforms to ISI Standards

Application Areas

1) Offices
2)School and Hospital
3)Mall
4)Paint Factories
5)Petrol Pumps
6)Factories and Manufacturing

Transformers Pulse Mist Cylinder Based System contact us: +919810599480

Industrial Products Company supplied all ceasefire protection, we have authorized dealer.(Yogendra K. Singh Contact us:+919810599480)

The Pulse Mist Based System has been specially designed for smaller environments, or for areas where the fire hazard is likely to be in an enclosed space (such as a transformer room). The extinguishing agent for the transformer is stored in cylinders attached to the network of pipes and detectors.

This system also includes pressurized cylinders filled with water, available in sizes ranging from 12Ltrs - 100Ltrs, rigged to the system via a manifold. 

Product Features

Multiple Applications
Self-Contained
Self-Actuating 24x7 Protection
Extended Reach
Quick Installation
Long Lasting 
Environmentally Friendly, no ODP
Non Conductive
High Standards 
Low Water Usage with Mist of 60-100 microns
Extra Security for People – Screening
Post Fire Damage Reduction
Safe for People and the Environment 
Economical
An Alternative to the Traditional Sprinkler System


Applications:


Apart from transformers, this system can be used for other areas and applications.

• Generators
• Genset canopy

• Engines: electric, diesel and petrol
• Earth movers
• Automobiles: buses, cars and trucks
• Food processing units
• Small food manufacturing units
• Moving kitchens in campers andcatering vans
• Electrical substation
• Factories
• Hangar protection
• Total building/big room protection
• Railways: locomotive, pantry car,coaches, etc
• Metro trains
• Industrial setups
• Any production unit where you don'twant chemicals to halt operations
• Areas where oil or other inflammablefuels are present