PPRC(Polypropylene Random Co polymer) Pipe contact us: +919810599480

Kipc India Pvt. Ltd supplied all PPR-C pipes available, we have authorized dealers. (Yogendra K. Singh Contact us:+919810599480)


Industries make a wild range of PPRC(Polypropylene Random Copolymer) Pipe, we can be used in so many places in Industries, that's one is Chiller line, in this time all industries remove old piping GI/MS to replace PPRC Pipe because that's life and quality too much,
all PPR-C pipe manufacture gives 100 years of life so that's a very good life for industries.

It's only and only food Grade pipe for fusion PPR Pipe.

“Range of Products”

PPR-C Pipes & Fittings - 20mm-315mm (½”-12”)PPR-C Flange Pipes for Submersible PumpPPR-C Coil PipeMechanical CouplingPP-FRP Pipes & FittingsPPR-C Chemical Coupled Pipes & Fittings. The long-term performance curve shows the behavior of pipeline depending on pressure & operating temperature. It establishes the average life expectancy of a pipeline as a function of hoop stress acting on the pipe walls.

PPRC Pipe and Features:

PPRC polypropylene random Copolymer stands for, can provide very high performance even under high and low temperatures and pressure conditions. Heating and hot water systems used in freshwater polypropylene random copolymer (PPR c) pipes ultra-high molecular structure due to a high level of use and durability. The raw material is manufactured from polypropylene random Copolymer. Plastic pipe, PPRC pipes in factories to human health, considering the value they give does not contain carcinogenic substances that affect human health, Europe's leading countries, and no successful results were obtained in tests it was determined that it did not cause health problems. In the United States, is approved by the health care law. Due to having a high tensile PPR C definitely does not affect the chemical properties of fluids in pipes. Algae PPR c pipes DIN 8077 DIN 8078 landed the absence of standards and a minimum of pressure drops are manufactured.

PPR C Pipes Application Area

Hot and cold plumbing systems inside and outside the building
- Solar energy systems
- Solar collectors
- Compressed air systems
- Air conditioning systems
- Industrial piping systems

PPR Thermal Conductivity is very low, thus it is possible to reduce heat loss/ gain water system. It is usually designed to last 50 years at any temperature. PPR does not support scaling. The inner surface of pipes and fitting has very low frictional resistance compared to standard pipes. This type of pipes has reducing distribution pressure losses. PPR piping assures very high resistance against abrasion by hard particles. PPR is very easy to join and low weight.

The capacity of 1.8MMT produces Reliance Polypropylene 7th largest manufacturer in the world. Polymer offers a wide range of Homopolymer, random and impact copolymer grades. Photopolymer grades from polymers are available in a wide range of melt flow and molecular distribution. They are used in flexible applications used for commodity and industrial packaging. The polymer has customized impact copolymer that is available in a diversified range of impact, the need for injection molding.

Among plastic pipe is most popular in plumbing across the world. The plastic pipe was developed in the 1990s. This pipe can deliver hot water at 95c with pressure 1.2 mph making the ideal plastic for both hot and cold water. Pipes and Fittings made from Polypropylene Random Copolymer and this are very popular for hot and cold water, it can use a residential building, commercial building, hotels and office buildings.

Today mostly reliance is the largest Polypropylene Random Copolymer supplier with a current capacity of 3.5mmt per year. It works in world-scale plants for Polypropylene, polyethylene, Polyvinyl Chloride using State of the art technology. A different field of categories provides applications across packaging, housing, healthcare, water, automotive, agriculture, and gas transportation.

Chiller Pipes Installation contact us: +919810599480

Kipc India Pvt. Ltd supplied all pipes Installtion sevice, we have authorized dealer. (Yogendra Kumar Singh- Contact us: +919810599480).

Chiller line in HDPE pipe primarily intended for the transportation of hot or cold water and sewage either buried or above grade. It is also used in HDPE Pipe for chiller line and cooling tower.

All Type of molded fittings and fabricated fittings shall be fully pressure rated to match the pipe SDR pressure rating to which they are made. All HDPE Chiller line fittings shall be molded or fabricated by the manufacturer.

All Type of transition from HDPE pipe to ductile iron or PVC shall be made per the approval of ASPA Engineer and the HDPE pipe manufacturer’s recommendations and specifications to chiller line. It’s an HDPE mostly used in industrial pipe services.

High-Density Polyethylene pipes/fittings shall be allowed for use as water, wastewater and reclaimed water pressure pipe where compatible with the specific conditions of the project. The use of a material other than HDPE pipe may be required by ASPA if it is determined that HDPE pipe is unsuitable for the particular application. All material used in the production of water main piping shall be approved by the National Sanitation Foundation.

Chiller Fittings.

All molded fittings and fabricated fittings shall be fully pressure rated to match the pipe SDR pressure rating to which they are made. All fittings shall be molded or fabricated by the manufacturer. No Contractor fabricated fittings shall be used unless approved by the Engineer.

The manufacturer of the HDPE pipe shall supply all HDPE fittings and accessories as well as any adapters and/or specials required to perform the work as shown on the Drawings and specified herein.

All fittings shall be installed using butt-fused fittings, thermo-fused fittings/couplings, or flanged adapters and must be approved by the Engineer. NO size on size wet taps shall be permitted.

All transition from HDPE pipe to ductile iron or PVC shall be made per the approval of ASPA Engineer and per the HDPE pipe manufacturer’s recommendations and specifications. A molded flange connector adapter within a carbon steel back-up ring assembly shall be used for pipe type transitions. Ductile iron back-up rings shall mate with cast iron flanges per ANSI B16.1. A 316 stainless steel back-up ring shall mate with a 316 stainless steel flange per ANSI.

The transition from HDPE to ductile iron fittings and valves shall be approved by the ASPA Engineer before installation.

Advantages

1) Lowest installed cost 

2) Less plant space than P/S

3) Easy to Control & Operate

4) Easy to Commission

Disadvantages

Highest Plant Energy Cost.

PPR C Pipe(Polypropylene Random Co polymer) And Fittings contact us: +919810599480

Kipc India Pvt. Ltd supplied all pprc pipes available, we have authorized dealers.(Yogendra K. Singh Contact us: +919810599480)

Overview

Industries make a wild range of PPRC Pipe,
we can use in so many places in Industries, that's one is Chiller line,
in this time all industries remove old piping GI/MS to replace PPRC Pipe because that's life and quality too much,
all pprc pipe manufacture give 100 years life so that's a very good life for industries.

It's only and only food Grade pipe for fusion PPR Pipe.


“Range of Products”

PPR-C Pipes & Fittings -20mm- 315mm (½”-12”), PPR-C Flange Pipes for Submersible Pump, PPR-C Coil Pipe Mechanical Coupling, PP-FRP Pipes & Fittings, PPR-C Chemical Coupled Pipes & FittingsAdvantages :

Health: Hygienic and low bacterial growth
High durability with a minimum of 50 years of life span
High Flow: Smooth interior surface results in no friction giving high flow
Taste and odor neutral
Heat preservation and energy saving
Resistant to high temperature (95°)
Less Insulation required
No Blockages: No crystallization for Lime deposits cling.


Field of Application :

Potable water pipe networks for Cold & Hot water installation i.e. in residential buildings, hospitals, hotels, offices & school buildings, ship buildings, etc.
Pipe Networks for rainwater utilization systems
Pipe Networks for Compressed - Air Plants
Pipe Networks for Swimming pool facilities
Pipe Networks for Solar Plants
Pipe Networks in Agriculture and Horticulture
Heating Pipes for Residential House
Pipe Networks for Industry, i.e. Transport of aggressive fluids (acids, leys, etc.)
Transport for Liquid Foods

Mechanical Joint Connection (for PPR-C & HDPE pipes): Fast, Easy bolted connection
Eliminates Butt Welding
A union at every joint
No electricity required
No special tool required(Jack, Mirror etc.)

HVAC Pipes Installation contact us: +919810599480

KIPC INDIA PVT LTD supplied all pipes Installation service, we have authorized dealer. (Yogendra K. Singh Contact us: +919810599480).

Products Overview

A fan draws air from the house into the system through return air vents. During cold weather, gas burners create heat, which in turn heats in the air. The hot air goes into the plenum and there flows into the line where the hot air is distributed through vents out the rest of the home.

The conditioned air the re-circulates back into the system as needed. When the weather is hot, you turn on the air conditioner and cooling coils inside the plenum then cool the air then distributed in the house. When you are in online from companies as Ductwork or go to local HVAC to get a load calculation worked. If it is an added after the house was built, you may need a new furnace.

The center point drills a pilot hole using the cutting bit in the hole cutter. Preset the cutting tool to the correct diameter. The center guides in the pilot hole and starts the cutting bit along the circumference of the hole. When you have to work in a less space, you have attached the cutting bit to any drill. The cutting bit then swivels around the center guide, forming a perfect circle.

PIPING INSTALLATION & FABRICATION

·         Heating Water System Piping

·         Chilled Water System Piping

·         Steam Piping

·         Stainless Process Piping & Certified Welding

·         Snowmelt and Radiant Heating

·         Retrofits and New Construction

INSTALLATION SERVICES:

· Central Plant

· Piping Systems

· Air & Ventilation Systems

· Dust Collection & Vacuum Systems

· Under-Floor Air Distribution (UFAD)

· Specialty Installs

· Cleanrooms

· Purified Water

· Stainless Steel

· HDPE

· CIP - Clean in Place

OUR PIPING CAPABILITIES

Our piping capabilities the fabrication, installation of process, utility piping, certified welding, and equipment setting.

High Density Polyethylene (HDPE) Pipes Installation contact us: +919810599480

Kipc India Pvt. Ltd Supplied all Industrial Pipe, we have authorized dealers.(Yogendra K. Singh Contact us: +919810599480)
 

This specification includes but is not limited to high-density polyethylene (PE 3408) (ductile iron pipe size O.D) pressure pipe primarily intended for the transportation of water and sewage either buried or above grade.

High-Density Polyethylene (HDPE) pipes/fittings shall be allowed for use as a water, wastewater and reclaimed water pressure pipe was compatible with the specific conditions of the project. The use of the material other than the HDPE pipe may be required by ASPA if it is determined that the HDPE pipe is unsuitable for the particular application. All materials used in the production of water main piping shall be approved by the National Sanitation Foundation (NSF).

REFERENCES

1) AWWA C901 Polyethylene (PE) Pressure Pipe & Tubing, 1/2 inch through 3 inches for water.

2) AWWA C906 Polyethylene (PE) Pressure Pipe & Fittings, 4 inches through 63 inches for water.

3) ASTM D3035 Standard Spec for PE Pipe (DR-PR) Based on Controlled Outside Diameter.

4) ASTM D3261 Butt Heat Fusion PE Fittings for PE Pipe & Tubing.

5) ASTM D3350 Standard Specification for PE Pipe & Fittings Materials.

6) TR-33/2005 Generic Butt Fusion Joining Procedure for Field Joining of PE Pipe.

INSTALLATION

1) High-Density Polyethylene (HDPE) Pipe shall be installed in accordance with the instruction of the manufacturer, as shown on the Drawings and as specified herein. A factory qualified to join the technician as designated by the pipe manufacturer shall perform all heat fusion joints.

2) HDPE shall be installed either by Open Trench Construction or Directional Bore Method.

3) Care shall be taken in loading, transporting, and unloading to prevent damage to the pipe. Pipe or fitting shall not be dropped. All pipe or fitting shall be examined before installation, and no piece shall be installed which is found to be defective. Any damage to the pipe shall be repaired as directed by the Engineer. If any defective pipe is discovered after it has been installed, it shall be removed and replaced with a sound pipe in a satisfactory manner by the contractor, at his own expense.

4) Under no circumstances shall the pipe or accessories be dropped into the trench or forced through a directional bore upon "pull-back".

5) Care shall be taken during transportation of the pipe such that it will not be cut, kinked, or otherwise damaged.

6) Ropes, fabric, or rubber protected slings and straps shall be used when handling pipes. Chains, cables, or hooks inserted into the pipe ends shall not be used. Two slings spread apart shall be used for lifting each length of pipe.

7) Pipes shall be stored on level ground, preferably turf or sand, free of sharp objects, which could damage the pipe. The stacking of the polyethylene pipe shall be limited to a height that will not cause excessive deformation of the bottom layers of pipes under anticipated.

Fusion PPR Pipe and fitting contact us: +919810599480

ABS Piping Techanical Detail by Industrial Products Company